Performances Evaluation of New FibroScan Probes Dedicated to Morbidly Obese Patients

Overview

Non-Alcoholic Fatty Liver is a common clinical and histological condition associated with metabolic syndrome in patients with and without excess body weight. It represents the most common cause of liver disease in the western world and it is characterized by an excess accumulation of fatty vacuole within hepatocytes. Patients with non-alcoholic fatty liver disease (NAFLD) can progress to non-alcoholic steatohepatitis (NASH), and then into cirrhosis and its complications. The prevalence of hepatic steatosis goes from 16 to 31% in the general population, from 50 to 80% in the obese population and up to 96% in morbidly obese patients. As the majority of obese individuals have NAFLD, non-invasive and widely applicable screening tools for the assessment of liver fibrosis and steatosis are needed. The detection in early stages is the main predictive factor of the long-term outcome. Liver biopsy has traditionally been the gold standard for the assessment of patients with NAFLD, although the well-known limitations. Among the non-invasive tools available in the market, the FibroScan® (Echosens™, Paris, France) has been shown to be a useful tool for diagnosing fibrosis and steatosis in patients with suspected NAFLD. The FibroScan® is an ultrasound-based vibration-controlled transient elastography (VCTE™) device dedicated to liver stiffness measurement (LSM) and the controlled attenuation parameter (CAP). Several clinical studies have shown the benefit of measuring hepatic stiffness with the FibroScan® in overweight/moderately obese persons. The ability to identify significant fibrosis and cirrhosis has been demonstrated in normal and overweight patients affected with chronic hepatitis B and C, biliary diseases, alcohol related liver disease and NAFLD. However, subcutaneous fat attenuates the transmission of shear waves into the liver and the ultrasonic signals used to measure their speed of propagation. When scanning morbidly obese patients (BMI≥35 kg/m²) with the XL+ probe, unreliable results occur mainly due to obesity. Therefore, the XL probe has been enabled to expand the applicability of the FibroScan® but, the realization of the XL+ examination is still very difficult in the case of morbidly obese patients. This is why to reduce this failure rate, Echosens has worked on developing the XXL probe specifically for measuring the LSM in morbidly obese patients.

Full Title of Study: “Performances Evaluation of New FibroScan Probes Dedicated to Morbidly Obese Patients – NEO Study”

Study Type

  • Study Type: Interventional
  • Study Design
    • Allocation: N/A
    • Intervention Model: Single Group Assignment
    • Primary Purpose: Diagnostic
    • Masking: None (Open Label)
  • Study Primary Completion Date: March 24, 2022

Interventions

  • Device: For the first 60 patients: 3 XXL probe prototypes of the FibroScan 630 Research Model
    • After the patient informed consent form signature and during the patient pre-operative routine hospitalization, the following examinations will be done: An ultrasound examination One examination with the FibroScan® 430 mini fitted with the XL+ probe (commercial reference) Three examinations with the FibroScan® 630 Expert – Research model fitted with the 3 XXL probe prototypes.
  • Device: From patient 61 to patient 120: 1 XXL probe prototype of the FibroScan 630 Research Model
    • After the patient informed consent form signature and during the patient pre-operative routine hospitalization, the following examinations will be done: An ultrasound examination One examination with the FibroScan® 430 mini fitted with the XL+ probe (commercial reference) One examination with the FibroScan® 630 Expert – Research model fitted with 1 adjusted XXL+ probe prototype (H+F prototype probe).

Arms, Groups and Cohorts

  • Experimental: Morbidly obese adult patients
    • Only one group of patients in the study: morbidly obese adult patients who will have an examination with the XXL probe prototype of the FibroScan 630 Research Model

Clinical Trial Outcome Measures

Primary Measures

  • Liver biopsy: fibrosis stage from F0 to F4 with Kleiner (NASH CRN) scoring system
    • Time Frame: 12 months
    • A liver biopsy will be performed during the bariatric surgery and will be sent to a centralized pathologist that will quantify the fibrosis and classify it from F0 to F4. Where F0 indicates the absence of fibrosis and F4 indicates cirrhosis.

Secondary Measures

  • Number of valid measurements per probe higher than 8
    • Time Frame: 12 months
    • In order to be considered as a reliable exam, at least 8 valid measurements should be taken by the XL probe and the XXL prototype probes. Invalid measurements can appear when the probe connected to the FibroScan can’t take a measurement for different reasons (distance skin to capsule very big, not good positioning of the probe….).
  • Liver Stiffness Measurement (LSM) from 1.5 to 75 kPa assessed with the FibroScan
    • Time Frame: 12 months
    • The FibroScan stiffness measurement relies on the propagation of elastic waves to assess the stiffness of the liver: the faster elastic waves propagates within the liver, the stiffer the organ is. The final LSM value is the median of individual LSM values using the valid measurements and is expressed in kilo Pascal (kPa). Values obtained for the LSM with every probe will be assessed.
  • Controlled Attenuation Parameter (CAP) from 100 to 400 dB/m, assessed with the FibroScan
    • Time Frame: 12 months
    • The intensity of ultrasonic signals received by the probe, which decrease as a function of depth and according to the medium, is measured:the CAP is the ultrasonic attenuation rate and is expressed in decibel per meter (dB/m). Values obtained for the CAP with every probe will be assessed.
  • Liver biopsy: steatosis grade from S0 to S3 with Kleiner (NASH CRN) scoring system
    • Time Frame: 12 months
    • Measure and classify the steatosis grade (fat in the liver) by analyzing the liver biopsy. Where S0 represents the minimal steatosis grade (<5% hépatocytes with fat) and S3 indicates a steatosis with >66% hépatocytes with fat.

Participating in This Clinical Trial

Inclusion Criteria

  • Patient must be at least 18 years old – Patient must be able to give written informed consent – Patient affiliated to a social security system – Patients participating in the standard bariatric surgery care program (bariatric surgery criteria defined with BMI ≥ 40 kg / m² or patients with BMI ≥ 35 kg / m² and at least 1 associated co-morbidity Exclusion Criteria:

  • Patient with presence of ascites – Patients with exclusion criteria for bariatric surgery

Gender Eligibility: All

Minimum Age: 18 Years

Maximum Age: N/A

Are Healthy Volunteers Accepted: No

Investigator Details

  • Lead Sponsor
    • Echosens
  • Provider of Information About this Clinical Study
    • Sponsor

Clinical trials entries are delivered from the US National Institutes of Health and are not reviewed separately by this site. Please see the identifier information above for retrieving further details from the government database.

At TrialBulletin.com, we keep tabs on over 200,000 clinical trials in the US and abroad, using medical data supplied directly by the US National Institutes of Health. Please see the About and Contact page for details.